Midea MVC-RTB2-R, User Manual

Page: 35 / 68

2. Standby
Standby means the robotic vacuum cleaner is not cleaning and is waiting for commands from user.
Standby mode can be achieved by one of the following methods:
a. During cleaning process. press "On/Off" button on the cleaner or remote control to enter standby
mode;
b. Press "On/Off" button on the remote control to stop the cleaner.
3. Sleep
In sleep mode, long press the "On/Off" button on the remote control or "ON/PAUSE" button on the main
body for 1 second to wake up the robotic vacuum cleaner. This may extend greatly the battery life.
Sleep mode can achieved by one of the following methods:
a. In standby mode, long press "ON/PAUSE" button on the main body for more than 3 seconds;
b. In standby mode, the cleaner will enter sleep mode automatically if no command is received for
more than 60 seconds.
Scheduled cleaning
You can schedule the robotic vacuum cleaner to start cleaning automatically at a particular time.
How to schedule the robotic vacuum cleaner
Note: This robotic vacuum cleaner can only be set in standby mode or charging mode. If the cleaner is in
sleep mode, press "ON/PAUSE" button on the main body or "On/Off" button on the remote control to
wake up the cleaner. If it is in cleaning mode, stop it before scheduling.
1 Scheduling by the display panel on the robotic vacuum cleaner
A) Time setting on the robotic vacuum cleaner
a. In standby or charging mode, press TIMING button to enter time setting mode. The display panel
will show the current system time;
b. Press "ON/PAUSE" button on the main body to enter the hour-setting mode, and the left two
numbers will flash. Press HOME button to increase and press SPOT button to decrease.
c. Press "ON/PAUSE" button again to enter the minute-setting mode, and the right two numbers will
flash. Press HOME button to increase and press SPOT button to decrease.
d. After scheduling, press "ON/PAUSE" button again to confirm and save the time.
B) Scheduling setting
a. In standby or charging mode, press button twice to enter scheduling setting, and the
scheduled time will be showed on the display panel. The display panel will show “00: 00”if no
scheduling is done.
TIMING
b. Press "ON/PAUSE" button to enter the hour-setting mode, and the left two numbers will flash.
Press HOME button to increase and press S
button to decrease; POT
c. Press "ON/PAUSE" button again to enter the minute-setting mode, and the right two numbers will
flash. Press HOME button to increase and press SPOT button to decrease.
d. After scheduling, press "ON/PAUSE" button again to confirm and save the time.
13