background image

Safety 

Precautions

  

 

 Page 7

 

   precautions shall be complied with prior to conducting work on the system.

2)Work procedure

   Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or 

   vapour being present while the work is being performed.

6.Information on servicing

1)Checks to the area

   Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to 

   ensure that the risk of ignition is minimised. For repair to the refrigerating system, the following 

   

1.Transport of equipment containing flammable refrigerants 

   See transport regulations

2.Marking of equipment using signs

   See local regulations

3.Disposal of equipment using flammable refrigerants

   See national regulations.

4.Storage of equipment/appliances

  The storage of equipment should be in accordance with the manufacturer's instructions.

5.Storage of packed (unsold) equipment

  Storage package protection should be constructed such that mechanical damage to the equipment 

  inside the package will not cause a leak of the refrigerant charge. The maximum number of pieces of 

  equipment permitted to be stored together will be determined by local regulations.

3)General work area

   All maintenance staff and others working in the local area shall be instructed on the nature of work 

   being carried out. Work in confined spaces shall be avoided. The area around the workspace shall be 

   sectioned off. Ensure that the conditions within the area have been made safe by control of flammable 

   material.

4)Checking for presence of refrigerant

Explanation of symbols displayed on the unit(For the unit adopts R32/R290 Refrigerant only):

WARNING

CAUTION

CAUTION

CAUTION

This symbol shows that this appliance used a flammable refrigerant. If the refrigerant 

is leaked and exposed to an external ignition source, there is a risk of fire.

This symbol shows that the operation manual should be read carefully.

This symbol shows that a service personnel should be handling this equipment 

with reference to the installation manual.
This symbol shows that information is available such as the operating manual or 

installation manual.

            Caution: Risk of fire/

            flammable materials

(Required for R32/R290 units only)

Summary of Contents for 373127

























Reviews: