43
SECTION 4
MAINTENANCE
c. Place fingers in an upright position to remove the outer plate.
Gently step on the lip of the finger and pull the outer plate off.
Figure 4-18.
d. To remove the inner plate, pull plate out and then up.
e. Scrub the parts using the black pad if necessary and then run the
parts through the dish machine and dry thoroughly. Spray the finger
parts with Kote.
f.
Reassemble the inner plate, keep your fingers clear so you won't
pinch them. The inner plate of a finger will only go on in one way
because of its design. Refer to Figure 4-18.
g. Replace the outer plate by placing your hands flat on the top of the
plate and pushing down. Keep your fingers clear so you won't pinch
them. Refer to Figure 4-17.
Figure 4-17.
F. Cleaning interior of oven.
1. Use the squirt bottle to spray the
inside of oven with water. Do not
spray into fan areas.
2. Wipe off all interior surfaces with
damp grill pad. Use your black pad
and putty knife to loosen any baked
on material. Refer to Figure 4-19.
Black Pad wrapped
around putty knife
Figure 4-19.
Summary of Contents for RED LOBSTER PS200-R68 Series
