Middleby Marshall RED LOBSTER PS200-R68 Series, Operating And Installation Manual

Page: 43 / 88

37
SECTION 4
MAINTENANCE
Figure 4-4.
Figure 4-5.
4. Remove tension from drive chain by lifting and pushing
the conveyor slightly into the oven. Remove drive chain
from conveyor drive sprocket as shown.
3. Remove conveyor drive chain
cover as shown.
Figure 4-6.
5. While one person pulls the conveyor out from the drive end of the
oven the second person should lift the far end (opposite end) of
conveyor until crumb tray slide is clear. Then both people can begin
sliding conveyor out from the drive end of the oven, as shown,
folding as they go. Move slowly and use caution as the conveyor
chain and the drive sprocket can be easily damaged.
6. Remove the lower end plug from each end of the oven. Refer to
Figure 4-3.