Middleby Marshall PS360E Series, Owner'S Operating & Installation Manual

Page: 27 / 60

SECTION 2
INSTALLATION
27
Stacking
For single ovens, skip ahead to Part C, Conveyor
Installation.
IMPORTANT
Middleby Marshall STRONGLY RECOMMENDS that
the PS360E/PS360EW Electric oven cavities be
stacked by AUTHORIZED PERSONNEL.
Contact your Middleby Marshall authorized Service
Agent for complete stacking instructions.
1. Stack an oven cavity on top of the lower oven.
Check the following:
− Insulation is installed on the lower oven top.
− All four sides of the lower lip (on the bottom
edge of the oven cavity) overlap the top of the
lower oven.
− The oven is level.
−
The oven is firmly seated and the top
insulation layer is installed smoothly and fully
covering the metal panel.
See Figure 19.
2. For triple ovens, repeat Step 1 to install the top
oven cavity.
3. Install the top panel using the screws included in
the base pad kit, as shown in Figure 20.
Stacking
Top Panel Installation