RTE-V852-PC
USER’ S MANUAL (Rev. 1.10)
8
3.4. POWER SUPPLY CONNECTOR [SCOKET/BASE BOARD] (JPOWER)
When this board is to be used as a standalone, that is, without being inserted in an ISA bus slot, the
board should be supplied with power from an external power supply by connecting it to the JPOWER
connector.
JPOWER connectors are provided both on the Socket board and on the Base board, but it is
recommended that the JPOWER connector on the Base board be used.
The external power should be one rated as listed below.
Voltage:
5 V
Current:
Maximum of 2 A (excluding the current supplied to the JEXT connector)
Mating connector:
Type A (5.5 mm in diameter)
Polarity:
GND
GND
+5 V
+5 V
[Caution]
When attaching an external power supply to the board, be careful about its connector
polarity. When inserting the board into the ISA bus slot, do not attach the JPOWER
connector to an external power supply.
