34
Manual Number 9019286 • Revision E, January 06, 2022
Figure 4.3
On-Board Status Indicator
STATUS/SOC Button
Pressing the STATUS/SOC Button serves several purposes.
From Active or Sleep Mode:
o
Cycles the chevrons in blue, followed by the state of charge (SOC) indication,
followed by continuous display of the Status indication.
o
Initiates a self-test of all battery discrete outputs which are set to active for 10
seconds.
o
If the battery has reached the end of discharge and under-voltage protection is
activated, pushing the status button will clear the under-voltage fault (if battery
voltages meet under voltage recovery limits as indicated in Table 4.1) and
allow further discharge.
From Sleep Mode (in addition to above):
o
Places the battery into Pre-Heat Cycle.
From Active Mode, when pressing and holding for three seconds:
o
Transitions to Sleep Mode
If the battery is charging or discharging, it will blink the ACTIVE green LED
and then remain Active (not enter Sleep Mode).
Summary of Contents for True Blue Power TB20 Series
Page 1: ...Revision E January 6 2022...
