16
Manual Number 9019286 • Revision E, January 06, 2022
Securing the Unit
The battery is designed to be secured in the aircraft using hold-down rods. The hold-down
features are integrated into the lid of the battery. The hold-down consists of a slot for the
hold-down rod, open to the outboard sides, and two perpendicular slots on each side to keep
the rod vertical using an alignment washer. The battery is then secured with the appropriate
nut or hardware designed to mate with the rod. Tighten the nut or equivalent to approximately
20 in-lbs (2.5 Nm). It is recommended to constrain the battery bottom with angle brackets or
similarly constructed features in the aircraft.
Figure 3.5
Hold-Down Mounting Features
7.7
8.6
4.6
0.4
1.1
0.8
0.2
0.4
1.5
0.2 deep
0.4
Summary of Contents for True Blue Power TB20 Series
Page 1: ...Revision E January 6 2022...
