12
Manual Number 9019286 • Revision E, January 06, 2022
SECTION 3 INSTALLATION
3.1 GENERAL
This section contains mounting, electrical connections and other information required for
installation. These instructions represent a typical installation and are not specific to any aircraft.
3.2 PRE-INSTALLATION INSPECTION
Unpacking: Carefully remove the battery from the shipping container. The shipping container and
packing are designed specifically for the transit of lithium batteries and approved by international
transportation agencies. These materials should be retained for use should the unit require future
shipment.
Inspect for Damage: Inspect the shipping container and unit for any signs of damage sustained in
transit. If necessary, return the unit to the factory using the original shipping container and packing
materials. File any claim for damages with the carrier.
Note: The unit is shipped at approximately 30% state of charge (SOC).
Upon receipt, the battery shall be fully charged using the procedures listed
in this manual (prior to storage and again prior to installation/use).
3.3 PARTS
Included Parts
A. TB20 Advanced Lithium-ion Battery
MCIA P/N 6430020-( )
B. Installation and operation manual
MCIA P/N 9019286
Available Parts
A. Connector Kit
MCIA P/N 9018042-1
i. Power Connector Kit
ii. Communications connector kit
B. Vent Kit
MCIA P/N 9019322-1
i. High temp vent hose (48”)
ii. Vent clamps (x2)
C. Mounting Kit
MCIA P/N 9019576-1
i. Corner Brackets (x4)
ii. Silicone Pad
D. MX Charger
MCIA P/N 282-101
E. PRO Charger
MCIA P/N ACM-1260-101
Installer Supplied Parts
A. Wires
B. Appropriate hold-down hardware
CAUTION
Summary of Contents for True Blue Power TB20 Series
Page 1: ...Revision E January 6 2022...
