manualshive.com logo in svg

Microweb MNC-300VN, User Manual, Page: 44 / 94

Share
Download
Microweb MNC-300VN User Manual Download Page 44

 

44

and password must be given (example: http://guest:[email protected]/jpg/image.jpg).   

Image File Name 

 

This option is used to for accessing the JPEG images with ".jpg" extensions. The file name 
should be less than or equal to 10 characters.   

Audio On/Off 

 

Activate or deactivate the camera's audio function. This option can be important in situations in 
which, by law, you are not allowed to do video surveillance that includes audio and you are required 
to install a camera without audio support.   

Video On/Off 

 

This option is used to stop sending video temporarily from your camera over the Internet or 
network; thus, when you click "Off," your network camera no longer sends video. (Factory default 
is Video "On.")   

LED On/Off 

 

In LED "On" mode, LEDs on your camera operate as described in LED Section 2.2 on Page 7. When 
you activate LED "Off" mode, then all LEDs are turned off as if your camera were inactive, but the 
camera is still sending video and audio over the network or Internet. This function can be useful if you 
want to trick a suspected thief into believing that the camera is turned off while, in fact, you are 
recording all of his/her actions.   

Digital PTZ control (only for digital PTZ camera models) 

 

Enable or disable the Digital PTZ control option on the camera homepage. This option is only 
available for the MPEG4 CMOS cameras models MNC-L100M20 and MNC-W100M20.   

Digital PTZ Step (1 ~ 9): (only for digital PTZ camera models) 

 

You can define PTZ step size here. Value 9: 12 steps between maximum zoom out and maximum 
zoom in. Value 1: 120 teps between maximum zoom out and maximum zoom in.This option is only 
available for the MPEG4 CMOS cameras models MNC-L100M20 and MNC-W100M20. 

System Information 

 

This is to check system information for the camera. You may see the model name, serial number, 
MAC number, BootRom and Firmware version (see Appendix E: Updating Firmware).   

 

Summary of Contents for MNC-300VN































































































Reviews:

No comments