37
1st, 2nd DNS Server Address
To map between an IP address and domain name, you should enter your DNS server address. If a
user sets the DNS server into the camera, users can configure the SMTP server, FTP server and NTP
server with its domain name.
NOTE:
A DNS (domain name system) is for mapping between an IP address and domain name. Every
network device in the world has its IP address for connecting to the Internet. And the device is to be
connected not with its domain name but with its IP address. Ordinary users may not be familiar with IP
addresses, but know the domain names. If a user accesses a certain network device with its domain
name, the DNS server translates the domain name into an IP address of the device and replies to the
user with the result.
SMTP Server
Enter the SMTP server IP address or hostname here to send camera system information by e-mail.
You should configure this first to get camera system information by e-mail.
Use SMTP Authentication
If you need user authentication for using the SMTP server, check the box and enter your ID,
password and realm for your SMTP server. (The camera’s SMTP authentication is supporting the
"LOGIN" method.)
- Authentication method: Choose the SMTP authentication method.
- ID: Enter the user ID for SMTP authentication.
- Password: Enter the user password for SMTP authentication.
- Realm: Enter the realm for SMTP authentication.
DDNS Registration
To register the camera to the DDNS (dynamic domain name system) server, check the "enable" box. A