Microtronics 305001, User Manual

Page: 71 / 127

Chapter 10 User interfaces
10.2.1.3.2 Config
Universal inputs
(digital modes)
Off --- ---
Digital High level Configuration of the "low" and "high" level
0 The levels are set automatically.
Warmup time not equal to 0:
l
"high": >8,25V
l
"low": <7,42V
Warmup time equal to 0:
l
"high": >2,21V
l
"low": <1,91V
> 0mV Level from which the signal at the
universal input is interpreted as "high".
"low" is detected at the "high level" -10%.
Cnt.Day
1)
High level Configuration of the "low" and "high" level
0 The levels are set automatically.
(see "Digital" mode)
> 0mV Level from which the signal at the
universal input is interpreted as "high".
"low" is detected at the "high level" -10%.
Cnt.Intervl.
1)
High level Configuration of the "low" and "high" level
0 The levels are set automatically.
(see "Digital" mode)
> 0mV Level from which the signal at the
universal input is interpreted as "high".
"low" is detected at the "high level" -10%.
1)
These modes are only available for universal input 1.
Rev. 02 71