Chapter 4 Guidelines for Integrating Your FPD Touch Monitor
51
Mounting Options
The ChassisTouch hardware accessory kit includes
four brackets, washers, and screws. The mounting
holes are located on the sides of the monitor and are
threaded to an 8-32 thread.
You attach the brackets to any of the four edges of
the chassis. The brackets are slotted, allowing the
chassis to slide in and out. You can also rotate the
brackets to various positions.
Note:
Do not mount the chassis unit directly from
the rear of the cover. Always use the brackets
provided.
ChassisTouch Cable Connectors
The cable connectors on the ChassisTouch monitor
may be mounted either on the side or on the bottom of
the unit, depending on the model you have.
Access to the Video Controls
The controls (four buttons) for adjusting the video display are always
located at the top of the ChassisTouch monitor. These four buttons let
you display the on-screen menu and adjust the phase, clock, image
position, contrast, and brightness. Make sure you will be able to
access the video controls once the ChassisTouch monitor is installed.
