Chapter 2 Setting Up Your FPD Touch Monitor
29
4.
Plug the AC/DC power supply into the monitor.
5.
Connect the power cable.
Note that your touch monitor includes an AC power cable and an
IEC to IEC power cable.
•
If you are using the AC power cable, plug one end of the
cable into the AC/DC power supply. Plug the other end into a
properly grounded power outlet. (Refer to the illustration on
the previous page.)
•
If you are using the IEC cable, plug one end of the cable into
the AC/DC power supply. Plug the other end into the outlet
on the back of your PC. (Refer to the illustration below.)
1
2
3
5
4
Note:
If you are setting up a ChassisTouch monitor, the connectors
for the touchscreen, power, and video cables may be mounted either
on the side or on the bottom of the unit, depending on the model you
have.
IEC to IEC
power cable
