ObjectScan 1600 User's Manual 17
Upper scan bed
Scanning the Materials
Positioning the Materials
1. Locate a handle at the front panel of the scanner. Grab it to pull out the
drawer of the scanner until reaching the edge of end.
2. If the height of a scanned object is less than 2.76" (7 cm), center the object
to be scanned facing up directly on the upper scan bed.
When placing the scanned object, do not block the calibration area
.
The calibration area is next to
the upper scan bed which is an
independent and unremovable entity
located at the right side of the
drawer.
