14 ObjectScan 1600 User's Manual
NOTE: If you have to transport the scanner, you will need to lock the scanner
back. Follow the steps below:
1. Turn off the scanner if your scanner is on. Make sure that the power button
light (green power light) is off.
2. Turn the scanner back on. Make sure that the Hi-Speed USB cable has
connected computer with your scanner properly. Then, activate ScanWizard
Graph software program. Make sure that the control panel of the software
has been displayed on the screen successfully.
3. Using a flat-head screwdriver, pass through a round circle at the outer shell
of the scanner and insert a hollow side of the locking screw. Push down
with force and turn the locking screw clockwise 90 degrees to the lock
position.
4. Shut down ScanWizard Graph software program and turn off your scanner.
Hereby, the scanner is ready for transport.
