12 ObjectScan 1600 User's Manual
Step 2: Installing the Software
Important:
You must install all software before connecting your scanner.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the Microtek Software DVD into
a drive.
3. Follow the on-screen instructions to
install the driver and software.
NOTE: If the Microtek Software
Installer screen does not come
up automatically, double-click
the following in succession: “My
Computer”; the DVD-ROM icon;
then Setup.exe to start the installer
program.
4. Click EXIT on the Microtek Software Installer screen when all the software
has been installed.
5. Restart your computer.
NOTE: If the system displays a message “Found a new hardware” after the
computer is restarted, please select the installer program automatically.
