Operating Instructions Thread tapping units/ Accessoriesr 01/09, Software 4.9
©
01.1994-2016 microtap GmbH
41
4.4.2.1 Program
With machine type jobtap only “thread cutting” and “thread forming” are working.
Select program by rotary knob (&)
By pressing the soft key (7) BACK you can return from every menu to the
working menu.
With soft key (4) you will get back to parameter menu.
-> THREAD CUTTING
THREAD FORMING
THREAD INSERT Mz
THREAD INSERT Fz
-> SCREWING Mz
SCREWING mm
ENDURANCE RUN
THREAD CUTTING:
The spindle threads the tap to the depth which is set before. If
Mz max is reached, the spindle reverses max. 3 times auto-
matically and tries to reach the depths. If it is not possible to
reach max. depth, the spindle switches into reverse and the
error message "Depth not reached" appears on the display.
THREAD FORMING
The spindle forms the tap to the depth which is set before. If Mz
max -10% is reached, the spindle reverses and the error
message "Depth not reached" appears on the display. The
reduce of 10% of the Mz prevents the tool clamp at reversal.
Display in working menu: FORMING.
THREAD INSERT Mz
Spindle turns in the thread insert till Mz max. is reached and
than switches into reverse. Display in working menu: NSAT Mz.
THREAD INSERT mm
Spindle turns in the thread insert till depths or Mz max. is
reached and than switches into reverse. Display in working
menu: NSAT mm.
SCREWING Mz
Spindle turns in the screw till Mz max. is reached and stops.
Display in working menu: SCREWING Mz.
SCREWING mm
Spindle turns in the screw till depth or Mz max. is reached and
stops. Display in working menu:: SCREWING mm.
ENDURANCE RUN Mz
Spindle turns in endurance run mode. Display in working menu:
“ENDURANCE Run Mz”
