Operating Instructions Thread tapping units/ Accessoriesr 01/09, Software 4.9
©
01.1994-2016 microtap GmbH
13
• Cutting
capacity
- microtap II-G2
M 0,5 - M 2
(X5CrNi189)
(Metric ISO-standard thread);
M 0.5 - M 2,5 (9SMn28)
DIN13/sheet 34
M 0.5 - M 3
(AlCuMgPb)
- microtap II-G5 / jobtap G5 / labtap
M 1.0 - M 5
(X5CrNi189)
(Metric ISO-standard thread);
M 1.0 - M 6
(9SMn28)
DIN 13/sheet 34)
M 1.0 - M 6
(AlCuMgPb)
- megatap II-G8 / jobtap / labtap
M 2.5 - M 8
(X5CrNi189)
(Metric ISO-standard thread);
M 2.5 - M 10 (9SMn28)
DIN 13/sheet 34)
M 2.5 - M 12 (AlCuMgPb)
- megatap II-G14 / jobtap
M 3.5 - M 12 (X5CrNi189)
(Metric ISO-standard thread);
M 3.5 - M 14 (9SMn28)
DIN 13/sheet 34)
M 3.5 - M 18 (AlCuMgPb)
- megatap II-G16 / jobtap
M 4 - M 14
(X5CrNi189)
(Metric ISO-standard thread);
M 4 - M 16
(9SMn28)
DIN 13/sheet 34)
M 4 - M 20
(AlCuMgPb)
Peripheral operating conditions
•
Room temperature for the machine
0 to 60 °C (32 to 140 °F)
• Isolation
IP
44
•
Continuous noise emittance;
70 dB(A)
(measured with continuous ZAP-operation)
(Reference meter: Onsoku Sand Meter SM-6)
Control system, interfaces (not for jobtap)
•
PLC-compatible control
4 Bit Input, 4 Bit Output,
parallel, galvanically isolated
•
Interfaces
RS 232, 9600 Baud, 8 Bit, no parity,
1 stop bit,galvanically isolated
•
Operation
menu driven, display 4-lines
Paint finish
microtap II / megatap II
emerald
green, RAL 6001
jobtap emerald
green, RAL 6001
labtap
bright ivory, RAL 1015
