Microsensor MFE600H Series, Operation Manual

Page: 3 / 30

2
Thank you very much for choosing our products. In order to better use the product, it is recommended
that you read the instructions carefully before using the product.
1
Introduction
MFE600H Series Energy Electromagnetic Flowmeter is designed and manufactured with the most
advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long
service life. We pay our attention to every detail in the process of the product structure design, material
selection, manufacturing, assembly and factory testing etc. With a water tower up to 37m as pressure
stabilizer for actual flow calibration, we have a professional production line for electromagnetic
flowmeter, also we design and develop a series of software and hardware for energy electromagnetic
flowmeter for mass production to ensure high quality in long term use.
It can be widely used in heating, air-conditioning and other heat measurement in civil residential districts,
office buildings and enterprises and institutions.
2
Specifications
Table 1
Diameter Flange type DN25
～
DN400
level of accuracy level 2
Electrode type Standard fixed electrode, antifouling electrode
Structure type
Integrated type, separated type (cable length of separated type≤100m)
Electrode material 316L, Ti, HB/HC, Ta, WC, Pt
Lining material Neoprene
（
CR
）、
Polytetrafluoroethylene
（
PTFE
）、
F46
Measured pipe Stainless steel
Nominal pressure 0.6MPa
、
1.0MPa
、
1.6MPa
、
2.5MPa
、
4.0MPa
flange/body flange Carbon steel (standard), stainless steel (optional)
converter housing Aluminum die-casting
Power supply
100 V AC
～
240V AC
12V DC
、
24V DC
Output signal
4mA~20mA DC (load resistance 0Ω~750Ω, active output)
Frequency, pulse output (Passive, active output optional)
Upper and lower limit alarm output (rated value 30V DC, 100mA)
RS485(Modbus protocol), RS232
Profibus-DP
、
Profibus-PA
Electrical connection M20×1.5
IP protection IP65
Display function English
Display Data
Instantaneous heat, instantaneous flow, accumulated heat,
accumulated flow, flow rate
Maximum flow reading (m³) 99999999999
Maximum heat quantity reading
（
MWH
）
99999999999
Heat flow unit MJ/h
、
GJ/h
、
kWh/h
、
MW/h
Temperature Sensor PT1000
Installation method Plug-in installation
Temperature measurement range -50
℃
～
200
℃