Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
11
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
2.6 Security and User Authentication
Web/Telnet, SNMPv2 and SNMPv3 offer different security strength
2.6.1 Web/Telnet Security
Web interface and Telnet share the same username and password.
2.6.2 SNMP Security
SNMP v1/v2
: Community string is utilized for Get/Set/Trap authentication. SNMPv1/v2 is considered
as unsecured protocol since the community string password can be easily intercepted by any network
sniffer device.
SNMP v3
: Resolves SNMPv1/v2 security issues by adding authentication and encryption to SNMP
packets.
2.7 Default unit IP, username and password
The unit is shipped with the following factory default usernames and passwords:
NOTE:
Default IP address:
IP =
192.168.0.50
Mask =
255.255.255.0
Web/Telnet:
Username =
”
admin
”
password =
”
password
”
SNMP v2:
GET community string
=”
public
”
SET community string = "
private
"
SNMP v3:
user name =”
admin
”
authentication password (MD5) = ”
password
”
privacy password (DES)= ”
password
”
Username, password recovery:
For username and password recovery, whenever unit username or password were
changed and are unavailable to the user, please refer to Section 9
