Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
35
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
6
Default configuration
– Unit was
restored to default configuration.
SysLog Server IP is
unchanged when restoring
unit to factory default,
7
Unit configuration changed
–
will
be sent whenever unit configuration
was changed.
9
PoE controller reset
–
will be sent
whenever PoE controller reset
occurred.
10
PoE controller has no firmware
–
will be sent in case PoE controller
firmware will be erased or become
corrupted.
11
Invalid Telnet
- remote user tried
to access the unit by Telnet with
incorrect username/password.
Remote user IPv4/IPv6 address
12
DHCPv4
– Will be sent only upon
the 1
st
first time DHCPv4 address
was obtained either by switching
from static to DHCPv4 or on power-
up.
Unit Hostname
Unit MAC Address
DHCPv4 address
Broadcast SysLog
message sent to IPv4
255.255.255.255
13
DHCPv6
– Will be send only upon
the 1
st
first time DHCPv6 address
was obtained either by switching
from static to DHCPv6 or on power-
up.
Unit Hostname
Unit MAC Address
DHCPv6 address
Broadcast SysLog
message sent to IPv4
255.255.255.255
:
