Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
12
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
3 Web Interface
Unit default IPv4 address is
192.168.0.50
. For first-time configuration, please configure your computer/laptop
Ethernet network interface to the following IPv4 parameters:
IPv4:
192.168.0.40
IPv4 Mask:
255.255.255.0
3.1 First-Time Configuration
Connect your PC/laptop Ethernet network interface (should be configured to IP 192.168.0.40) to anyone of the
unit Ethernet ports. Open your Web browser and type 192.168.0.50 in the top address field.
Default web username is
admin
,
and default
password is
password
.
Selecting the Configuration option on the menu will reveal the unit configuration Web page. Please change the
unit remote access username and password to other then
admin/password
, unit IPv4/IPv6 address, and if
required enable SNMP only after changing the default GET/SET community strings to other than
public/private
.
To ease unit location over the network, the unit sends IPv4 SysLog broadcast message advertising its IP
address upon power up and the first time an IPv4/IPv6 is obtained from the DHCPV4/DHCPv6 Server (see
Figure 3-2).
Figure 3-2: Powerup SysLog Report
– Unit IP, MAC Address, Hostname, and More
Figure 3-1: Configuration Web Page Option
