Microscan HawkEye 1600T, Manual

Page: 65 / 79

HawkEye™ 1600T Connection Matrix
Se
tting
Up
Ne
tw
ork
Comm
unications
D
Rev. 1G, Dec 2008 HawkEye™ 1600T Smart Camera Guide D-3
3.
When you are done, click OK. The camera will be rebooted automatically
for the changes to take effect.
Note: All the Network parameters of the camera are stored in Non-Volatile
memory and can also be modified from the Bootloader (a low-level diagnostics
program) that can be invoked using HyperTerminal and a Serial connection. This
is described in Appendix E, “Updating Firmware on 1600T Cameras,” as many
unique and useful parameters can only be changed using this method.
HawkEye™ 1600T Connection Matrix
Table D–1 describes the various options such that the Camera and PC can
communicate fully over TCP/IP.
TABLE D–1.
IP Addresses
Camera Host PC
DHCP
on LAN?
Action Connection
DHCP DHCP Yes Both get IP addresses from
Server Yes
DHCP DHCP No Camera and Host may fall over
to compatible IP Addresses
(169.254.x.x) (255.255.0.0)
(Automatic Private IP
Addressing (APIPA)) Maybe. Not all PCs
will default to
(169.254.x.x).
Some will default to
(0.0.0.0) – set static
IP on PC to APIPA
address (169.254.x.x
255.255.0.0).
Static Static N/A Camera and Host must be set to
compatible static IP address.
Default static IP for camera (as
delivered) is: 192.168.254.3.
Set PC to (for example)
192.168.254.2.
Both on (255.255.255.0) subnet.
Yes if IP Addresses
are compatible.