manualshive.com logo in svg

Microscan HAWK MV-4000, Manual

Share
Download
Microscan HAWK MV-4000 Manual Download Page 84

Appendix

C

General Specifications

C-4

HAWK MV-4000 Smart Camera Guide

VGA/USB Port

The following information relates to the device that can be connected to the VGA/USB port.

•

Output: 

RGB analog output.

•

Maximum supported resolution:

 1920 x 1200.

•

Maximum pixel depth:

 32-bits.

•

Maximum vertical refresh frequency: 

60 Hz - 85 Hz, depending on resolution.

Lenses

Keep the lens free of fingerprints and dust. Do not clean with an alcohol-based cleaning 

solution and do not spray water or cleaning fluids directly onto the lens. Instead, use a can 

of compressed air or a lens cleaning cloth to remove dust.
The HAWK MV-4000 works with the Varioptic Caspian C-39N0-160-I2C or C-39N0-250- 

I2C lens (liquid lens). This electronically focus-controllable C-mount lens fits within the 

optional IP lens case. The Varioptic lens connects to the liquid lens connector inside the 

lens case housing of your HAWK MV-4000.

General Care and Cleaning

To clean the unit housing, use a small amount of mild detergent cleaner on a cleaning 

cloth. Do not pour the cleaner directly onto the unit housing.
To remove dust from the lens cap, use either a can of compressed air or a lens cloth. The 

air must be free of oil, moisture and other contaminants that could remain on the lens cap.
To clean the glass window of the lens cap, use a small amount of isopropyl alcohol on a 

cleaning cloth. Do not pour the alcohol directly on the glass window.

Summary of Contents for HAWK MV-4000















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands