manualshive.com logo in svg

Microscan HAWK MV-4000, Manual

Share
Download
Microscan HAWK MV-4000 Manual Download Page 116

Appendix

G

Operating System Save and Restore

G-2

HAWK MV-4000 Smart Camera Guide

Restore to Microscan Factory Settings

Warning:

 This utility will 

reformat

 and 

erase all data 

currently on your hard drive. It will 

restore 

the original operating system, device drivers, and any other software provided by 

Microscan to its factory-configured state. If you have external drives connected, be sure to 

select the correct drive or disconnect all external hard drives to prevent data being erased 

by accident. You must manually restore all personal data files and/or software applications 

that were not provided by Microscan. If possible, back up all data and software applications 

before proceeding.

Important: 

It is recommended that you copy your personal data: Jobs directly onto the Microscan 

HAWK Recovery USB key prior to restoring your camera to Microscan factory settings. You 

can do this by copying the following folder to the USB key:

The folder should be copied directly to the USB key’s top level directory and restored later 

once you have reset your camera to factory defaults.

Note: 

You will also need to restore your software licenses from the USB key to your camera. 

To do this, copy the contents of the Licensing folder at the top level of your HAWK Recovery 

USB key to the following location on your camera: 

HAWK (C:)\Microscan\VscapeRuntime 

\Config\Licensing\

 once restored to factory defaults.

To restore your HAWK MV-4000 to factory settings, do the following: 

1.

The HAWK MV-4000 is delivered with an 

OS Rescue USB KEY

. Insert the USB key 

into your HAWK MV-4000. You may require a USB hub to make this connection so you 

can add a keyboard and mouse.

2.

Boot up the unit, and press 

ESC

 to enter the 

BIOS

 menu.

3.

Select 

Boot Manager

. On the Boot Manager menu, select the option to Boot from 

Legacy USB Key, which will be Microscan's Rescue USB Key.

Summary of Contents for HAWK MV-4000















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands