Microscan HAWK MV-4000, Manual

Page: 132 / 142

Appendix G
Operating System Save and Restore
G-18 HAWK MV-4000 Smart Camera Guide
Capture OS
To customize your unit and deploy the same configuration to other HAWK MV-4000
cameras, do the following:
1.
After the Out-Of-Box-Experience (OOBE) completes, switch to Audit Mode as soon
as possible . This allows you to keep the multiple language capability on other units.
To switch to Audit Mode, go to the OSConfig.exe > Capture OS tab and click the
Reboot to Audit Mode button.
2.
In Audit Mode, you are automatically logged on as the Local Administrator . You
have full access to configure your system. Make sure the Unified Write Filter (UWF) is
disabled so your settings can be saved. While you are in Audit Mode, every time you
reboot, the
System Preparation Tool (Sysprep) windows will pop up. You can ignore
it or click Cancel to close the window.
3.
When you are done configuring your unit, go back to the OSConfig.exe > Capture OS
tab and click the
Reboot and Launch Capture Tool button. Before launching the
System Preparation Tool (Sysprep) to reseal the image, it will delete the msuser
account, click OK to continue. The system will reboot and run Sysprep to reseal the
image. When this is done, it will reboot to System Recovery Options .
4.
After your PC restarts to the Choose an Option screen, select Troubleshoot >
Microscan Rescue Utility .
5.
After accepting the License Agreement, the windows will show up with option already
selected:
Capture the OS for Deployment .
6.
Select the location of the USB device to save the captured OS.
Warning: This will reformat the USB device and all data will be erased.
The utility will configure the USB device to be bootable with all necessary settings to
restore your customized image to other HAWK MV-4000 units.