Micros Systems PCWS 2015, Setup Manual, Page: 92 / 178

3-24 PCWS 2015 Setup Guide - 2nd Edition
What’s Inside?
System Board Technical Description
o Intel Trusted Execution Technology (Intel TXT).
o Intel Streaming SIMD Extensions 4.1 (Intel SSE4.1)
o Supplemental Streaming SIMID Extensions 4.2 (Intel SSE4.2)
o Intel Hyper-Threading Technology (Intel HT Technology)
o Intel 64 architecture
o Execution Disable Bit
o Intel Turbo Boost Technology
o Processor Context Identifier (PCID)
System Memory Support
The following applies to either processor selection.
One or two channels of DDR3 memory with a maximum of one SO-DIMM per
channel.
1GB or 2GB DDR3 DRAM technologies are supported for x8 and x16 devices.
2 x 2GB = 4GB
Using 2GB device technologies, the largest memory capacity possible is 8GB,
assuming dual channel mode with two sockets.
Up to 32 simultaneous open pages, 16 per channel (assuming 4 ranks of 8 Bank
Devices)
Memory organization:
• Single-channel modes (one DIMM)
• Dual Channel modes - Intel Flex Memory Technology
Dual-channel symmetric (Interleaved)
• Dual Channel asymmetric
• Single and Dual Channel memory organization modes.
• Data burst length of eight for all memory organization modes.
• DDR3 transfer rates of 800 MT/s (Celeron P4505) and 1066 MT/s
(i5-520M)
Intel HD Graphics Controller
The available Celeron P4505 or i5-520 processors have identical graphics
controllers.
The graphics controller is powered by a refresh of the fifth generation graphics
and supports twelve, fully programmable execution cores. The integrated
graphics controller contains several types components including the graphics
engines, planes, pipes, port and the Intel FDI.
The HD Graphics controller includes the following features: