Micros Systems PCWS 2015, Setup Manual, Page: 123 / 178

PCWS 2015 Setup Guide - 2nd Edition 4-3
Installing and Operating the Workstation 2015
Care and Handling
• Devices that emit RF energy, such as cordless phones, and walkie-talkies
should be kept at least 8 inches from the equipment or cable during
operation.
Electrostatic Discharge (ESD)
The occurrence of electrostatic discharge (ESD) usually takes the form of a
discharge from the operator’s hand to cash drawers, the workstation, the
magnetic stripe card reader or other peripherals.
ESD is more common in dry climates during the winter, and less common in
moist climates. The workstation has excellent built-in immunity to ESD in
most environments. However, tile or anti-static carpet is recommended in areas
near the workstation.
Temperature and Humidity
The PCWS 2015 can operate in temperatures between 0°C (32°F) and 45°C
(113°F). A constant humidity between 40% and 90% is required for proper
operation of the equipment.
AC Power and Data Cabling Requirements
AC Power cabling, Ethernet and MICROS IDN data cabling should be
installed in accordance with the appropriate MICROS Site Preparation Guide.
Cleaning the Display, Cabinet, and Magnetic Stripe Reader
Recommendations for cleaning the Cabinet, Magnetic Stripe Reader and LCD
cover are described below.
LCD Cover
The Operator Display overlay can be cleaned using any common
household cleaner applied with a clean cotton cloth. Always spray the cloth
with the cleaner first, then use the cloth to clean the overlay.
Cabinet
Always use a chamois or clean lint-free cloth to clean the cabinet and
screen surface. Do not use chemical, alcohol, or petroleum based cleaners
that are not recommended for plastics.
SHOCK HAZARD
Before performing preventive maintenance or cleaning
the workstation, use the power button to turn the unit off.