Micros Systems PCWS 2015, Setup Manual, Page: 154 / 178

5-10 PCWS 2015 Setup Guide - 2nd Edition
Diagnostics
PC Workstation 2015 Diagnostic Utility
• To disable a USB port, touch the box to remove the check mark from the
corresponding port. To enable a USB port touch the box and the
check-mark appears.
o The change in USB port status take effect immediately, a restart is not
required.
o When complete, exit the Diagnostics Utility.
o Using the CMOS jumper or updating the BIOS resets all USB ports to
enabled.