88 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 50 A3 - 3
Edition 2.1
5.13. Enabling Format Check
This function is used to enable or disable automatic format check of the printer.
If format check is active, the MPC identifies format commands in the data stream and
prevents for example printing on undersized paper.
Hint:
If format check is disabled, every feeder selection / cassette selection is carried
out (even if the paper in the selected feeder is too small for the print image).
Note:
For the multipurpose feeder the separate panel function
[Fmt.Chk.Man.Feed ] has to be used in the same manner.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1
]
[Engine ]
[Resolution ]
[Format Check ]
[Off ]
[On ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[Format Check ] is displayed.
Press the NEXT or PREVIOUS key until
[On ] is displayed.
The format check is enabled.
In addition this new value can be saved
as setup value (using the SELECT key),
before the printer is turned ON LINE
again.
