Panel Functions 105
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 50 A3 - 3
Edition 2.1
5.26. Image Shifting to the Y-Direction
This function shifts the print image in relation to the paper to the
Y-direction (print direction).
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
[Engine ]
[Resolution ]
[Image Y-Pos. ]
[Y-Pos.: = 104 Dot ]
[Y-Pos.: = 296 Dot ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[Image Y-Pos.] is displayed.
Approx. 1/3 Inch = currently set value.
Operating the NEXT or PREVIOUS key
the image can be shifted relative to the
paper. Settable are pos. and neg.
values up to about 2 inch (=50.8
mm)
.
Now the image has been shifted for
296/300 inch (approx. 1 Inch)
against the print direction.
In addition this new value can be
saved as setup value (using the SELECT
key), before the printer is turned ON
LINE again.
