67
6.4.2 TCP/IP
You can configure the MFP Server to automatically get IP
from DHCP server or manually specify static IP.
If you need the MFP Server to automatically get an IP from
DHCP server, select “
Enable Obtain TCP/IP Settings
Automatically (Use DHCP/ BOOTP)
”. You also can select
“
Disable Use the following TCP/IP Settings
” to manually
assign
IP Address, Subnet Mask and Gateway
for the
MFP Server.
After configuring the MFP Server, you have to click the
“
Save Settings
” to save the settings and restart the
system.
Summary of Contents for SP781
