MicroNet SP781, User Manual

Page: 117 / 123

117
13. Troubleshooting
1. This product is not found even after searching by the “ MFP
Manager ”.
„
Check if the power adapter and the network cable are
connected to the MFP Server properly.
„
Check if the LAN and Ready LEDs are turned on.
„
Check if the IP Address of the MFP Server is in the network
segment as your computer.
-
If you are not sure the IP Address setting of the MFP Server,
please check the TCP/IP setting of the MFP Server from
the “ MFP Admin ”.
2. The ways to change the IP Address of the MFP Server.
„
A DHCP Server is installed in the network
If a DHCP Server is installed, you can setup to let the MFP
Server get IP Address from the DHCP Server automatically.
1. Open “ MFP Admin ” and then select “ TCP/IP ” setting.
2. Select “ Auto IP ” and click “ Save ”.
3. Reboot the MFP Server.
„
Set up the IP Address Manually
1. Open “ MFP Admin ” and then select “ TCP/IP ” setting.