MicroNet SP781, User Manual

Page: 13 / 123

13
powered on. When the Status LED is unlighted, the MFP
Server is ready.
Note:
1. You must use the power adapter shipped along with
the MFP Server, do NOT use any other power adapter
from other sources.
2. To prevent the compatibility problem between MFP
Server and a few MFP or printer, it is recommended
that you power on the MFP Server before the MFP or
printer.
2.2 Software Installation Procedure
Before you start, you should check your computer’s operating
system. This program can be run in Windows 2000 SP4,
Windows XP SP1 or above. Please follow the steps below to
start installation.
Tip: Any time, install a newer MFP server driver/utility, the utility
will uninstall the former software in the computer and reboot the
system. Install the new program after reboot.