MicroNet SP781, User Manual

Page: 108 / 123

108
superuser (root). Perform the following steps to add
address entries,
1. Optionally, assign a name corresponding to the MFP
Server
’
s IP address. You can add this address to the
/etc/hosts file, by adding a line such as:
203.66.191.12 pserver
2. Add an entry to the host
’
s /etc/bootptab file, similar to
the following:
hostname:\
:ht=1:\
:ha=MFP_Server_ethernet_address:\
:ip=MFP_Server_ip_address:
Lines should be indented with tabs.
Where hostname is the device name of a MFP Server, the
ht=1 tag specifies the hardware type is Ethernet, the ha=
tag specifies the Ethernet address of a MFP Server, which
is the Node ID located on the MFP Server. The ha tag must
be preceded by the ht tag. The ip= tag should correspond
to the IP address you want to assign to the MFP Server.
For example, a MFP Server with the following
configuration: