MicroNet SP781, User Manual

Page: 56 / 123

56
1. Auto – The MFP Server will detect DHCP server within the
network automatically. If the DHCP server doesn’t exist, the
MFP Server will turn on his own DHCP server and assign IP
Address to client. Fill in the “ Starting Address ”, “ Range ”,
“ Subnet Mask ”, “ Gateway ” and “ DNS ”; then the MFP Server
will assign a unique IP within the range for each DHCP client.
2. Enable – If the DHCP is enabled, you have to assign a range
of IP addresses. Fill in the “ Starting Address ”, “ Range ”,
“ Subnet Mask ”, “ Gateway ” and “ DNS ”; then the MFP Server
will assign a unique IP within the range for each DHCP client.
3. Disable – The DHCP Server is disabled. You have to build up
a DHCP Server in the network or set the IP Address for each
client manually.