MicroNet SP766W, User Manual, Page: 90 / 137

82
8.4.2 Wireless
If you want to use the print server through wireless LAN, please set up the
print server through Ethernet first and make sure your wireless LAN
setting is correct. After setting the wireless LAN, unplug the Ethernet
cable and restart the print server, then you can start to use the print server
through wireless LAN.
If the wireless configuration does not work, please plug the Ethernet cable
again, restart the print server and configure the print server through
Ethernet until the wireless LAN settings are correct.
You can enable/disable the wireless function and set parameters that are
used for the wireless stations to connect to this print server from here. The
parameters include “
Function ”, “ Mode ”, “ ESSID ” and “ Channel Number ”.
You can manually set the parameters of wireless LAN in this page or use
the “
Site Survey ” function to automatically search for an available access
point and associate with it.
Function:
Function is for user to disable, enable or let the print server auto select to
connect to the wired or wireless network.
1. If “ Disable ” is selected, the print server can only connect to the
network through wired Ethernet. If “ Enable ” is selected, the print
server can only connect to the network through Wireless LAN.