MicroNet SP766W, User Manual

Page: 62 / 137

54
You can configure the print server to automatically get IP from DHCP
server or manually specify static IP. The print server also has a built-in
DHCP server. You can enable this DHCP server and let it manages IP for
you.
Click the “ IP ” button to enter the IP setting page. If you need the print
server to automatically get an IP from DHCP server, select “ Auto IP ”. You
also can select “ Static IP ” to manually assign “ IP Address ”, “ Subnet
Mask ” and “ Gateway ” for the print server.
Click the “ DHCP Server ” button to enter the DHCP server’s setting page.
You can “ Enable/Disable ” the DHCP server or set “ Auto ” and assign a
range of IP addresses here. The DHCP server is disabled by default. If
Auto is selected, the DHCP Server of print server will be enabled only
when there is no other DHCP Server within the network. When “
Enable ”
or “ Auto ” is selected, you have to configure “ Starting Address ”, “ Range ”,
“ Subnet Mask ”, “ Gateway Address ” and “ DNS ”. The print server will
assign a unique IP for each client.