MicroNet SP3524A, User Manual

Page: 4 / 76

1
1. Introduction
Micronet SP3524A is an EoVDSL (Ethernet over VDSL) clustering switch that allows high
port-density of 24 VDSL lines in one system. It delivers cost-effective and high-
performance broadband / multimedia services to multiunit building environments, such as
enterprise, campus, hospital, hotel, and telecom. Based on 4-band VDSL technology, the
VDSL solution dramatically provides improved performance that supports 5M/15M/25Mbps
symmetrical bandwidth over the range of up to 1.7/1.1/0.6KM.
1.1 Key Features
y
Compliant with ETSI, ITU, ANSI standards
y
QAM 4-band VDSL technology
y
Allow for high port density, up to 24 VDSL lines available in one system
y
Support 2 x RJ-45 ports of 10/100/1000M for Gigabit uplink
y
Data rate up to symmetrical bandwidth of 25Mbps
y
Wiring range up to 1.7KM
y
Bandwidth management on VDSL ports for classified services
y
Fixed/Auto function for VDSL link
y
Built-in POTS/ISDN splitter for POTS/ISDN telephone service
y
Supports detection of wiring quality with SNR (Signal to Noise Ratio) indications
y
Full function of Layer 2 managed switch: IEEE 802.1q/p Tag-based VLAN, IEEE
802.1v Protocol-based VLAN, IEEE802.3ad LACP, IEEE 802.1d Spanning tree,
IEEE 802.1x Port-based network access control, MAC/IP filtering, IGMPv2, Port
Mirror, and Broadcast Storm Control
y
In-Band/Out-of-Band Management
y
SNMPv1 and MIBs support: Bridge MIB, Ethernet MIB, MIB II