26
4.8. Trunking
The Link Aggregation Control Protocol (LACP) provides a standardized
means for exchanging information between Partner Systems on a link to
allow their Link Aggregation Control instances to reach agreement on the
identity of the Link Aggregation Group to which the link belongs, move the
link to that Link Aggregation Group, and enable its transmission and
reception functions in an orderly manner. In conclusion, Link aggregation
lets you group up to eight consecutive ports into a single dedicated
connection. This feature can expand bandwidth to a device on the network.
LACP operation requires full-duplex mode, more detail information refers to
IEEE802.3ad.
Aggregator
setting
System Priority:
A value used to identify the active LACP. The switch
with the lowest value has the highest priority and is
selected as the active LACP.
1. Group
ID:
There are seven trunk groups to provide configure. Choose
the "group id" and click "Get".
2. LACP:
If enable, the group is LACP static trunking group. If disable, the
Summary of Contents for SP3524A
