17
4. Web Management
4.1. Port Status
This page can see every port status that depended on user setting and the
negotiation result.
1. State:
Display port statuses disable or enable. “Unlink” will be treated
as “off”.
2. Link:
Down is “No Link”, UP is “Link”.
3. SNR:
(Sign to Noise Ratio) The SNR can use as an indication of the
quality of the Link. If SNR Value>25, it means connection in
Good Link status.
4. Speed:
Ports 1-24 are 5/15/25Mbps VDSL, Port 25-26 are
10/100/1000Mbps.
5. Duplex:
Display full-duplex or half-duplex mode.
6. Flow Control: Full:
Display the flow control status is “enable” or
“disable” in full mode.
Half:
Display the backpressure is “enable” or
“disable” in half mode
7. Rate Control:
Display the rate control setting.
Ingr:
Display the Port effective ingress rate of user
setting.
Egr:
Display the Port effective egress rate of user
setting.
Summary of Contents for SP3524A
