27
group is local static trunking group. All ports support LACP
dynamic trunking group. If connecting to the device that also
supports LACP, the LACP dynamic trunking group will be created
automatically.
3. Work
ports:
Allow max four ports can be aggregated at the same time.
If LACP static trunking group, the exceed ports is standby
and able to aggregate if work ports fail. If local static
trunking group, the number must be as same as the group
member ports.
4.
Select the ports to join the trunking group. Allow max four ports can be
aggregated at the same time.
5.
If LACP enable, you can configure LACP Active/Passive status in each
ports on State Activity page.
6.
Click Apply.
Aggregator
Information
When you are setting LACP aggregator, you can see relation information in
here.
1. This page is no group active. LACP don’t working.
2. This page is Static Trunking group.
Summary of Contents for SP3524A
