3 7
To install a battery pack, first place the computer in suspend
mode or power down completely. Then insert the battery into
one of the expansion bays and push it into the compartment
until you hear a click. The battery is now ready.
Inserting and removing a battery pack
Figure 2-2: Inserting a battery pack into the Left Bay.
Warning:
Do not install or remove a CD-ROM, hard disk drive,
or floppy drive without first turning off your
TransPort X
KE
.
Figure 2-3: Releasing the module latch.
To remove the battery pack, first place the computer in
suspend mode or power down completely. Then move the
release latch and pull the pack out of the compartment. It
should slide out easily.
Release
Latches
