38
5.4. Measuring procedure
After the cuff has been appropriately positioned,
the measurement can begin:
a) Press the 0/I-button, the pump begins to inflate the
cuff. In the display, the increasing cuff-pressure is
continually displayed.
b) After reaching the inflation pressure, the pump
stops and the pressure slowly falls away. The cuff-
pressure (large characters) is displayed during the
measurement. When the device has detected the
pulse, the heart symbol in the display begins to blink
and a beep tone is audible for every pulse beat.
c) When the measurement has been concluded, a long
beep tone sounds. The measured systolic and
diastolic blood-pressure values as well as the pulse
frequency are now displayed.
Example (Fig.): Systole 118, Diastole 73, Pulse 75
The measurement results are displayed, until you switch the device off.
If no button is pressed for 5 minutes, the device switches automatically
off, to save the batteries.
9663_Mobil_GebrAnw_innen_RZ.indd 38
02.12.2008 11:46:02 Uhr
zur Verfügung gestellt von Gebrauchs.info
5.4. Measuring procedure
5.4. Measuring procedure
Aktualisierungsstand Gebrauchs.info November 2011
