39
5.5. Discontinuing a measurement
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g. the patient feels unwell),
the 0/I button can be pressed at any time. The device then
immediately lowers the cuff-pressure automatically.
5.6. Memory – storage and recall of the measurements
The blood-pressure monitor automatically stores each of
the last 30 measurement values. By pressing the MEMORY
button, the last measurement (MR1) as well as the further last
29 measurements (MR2, MR3, ..., MR30) can be displayed one
after the other.
(MR1: Values of the last measurement)
(MR2-MR30: Values of the measurement before MR1)
Further information
Measurements should not occur soon after each other, since otherwise, the results
will be falsified. Wait therefore for several minutes in a relaxed position, sitting or
lying, before you repeat a measurement.
9663_Mobil_GebrAnw_innen_RZ.indd 39
02.12.2008 11:46:02 Uhr
zur Verfügung gestellt von Gebrauchs.info
5.5. Discontinuing a measurement
5.5. Discontinuing a measurement
Aktualisierungsstand Gebrauchs.info November 2011
