© Microhard
77
4.0 Configuration
IP Protocol Config (Continued
…)
•
Remote Port
The UDP port associated with the Remote IP Address (above). In the case of this
‘
Remote
’
being the Master Nano IP Series, the value in this field should match the
Listening Port of the Master (see UDP Point
-
to
-
Multipoint (P)).
Default:
20012
•
Multicast IP Address
A valid MULTICAST address that this unit will use to receive multicast UDP packets sent
by a UDP Point
-
to
-
Multipoint (P) unit. Note that the default value for this field matches
the default Multicast IP Address of the UDP Point
-
to
-
Multipoint (P) configuration
described on the previous page.
Default:
224.1.1.2
•
Multicast Port
The UDP port that this unit will use, along with the Multicast IP Address detailed above,
to receive the multicast UDP packets sent by the UDP Point
-
to
-
Multipoint (P) unit.
Default:
20002
•
Multicast Interface
Specify the interface on which to send/listen for multicast packets.
Default:
default
Summary of Contents for pMDDL5824
