© Microhard Systems Inc.
26
4.0 WebUI Configuration
Time (hh:mm:ss)
The calendar date may be entered in this field. Note that the entered value
is lost should the IPn3G lose power for some reason.
Values (11:27:28)
hh
= 2-digit hours
mm
= 2-digit minutes
ss
= 2-digit seconds
Timezone
The Timezone field allows you to set the time zone in the IPn3G. Select the
time zone from the dropdown list that matches your location. Time zones
are sorted by UTC (+/-) offset.
Values (List)
Select the applicable time
zone from the dropdown
list.
Console Timeout (s)
This value determines when the console connection (made via COM2) will
timeout after becoming inactive.
Values (seconds)
60
0-65535
Wireless Traffic Timeout (s)
The Wireless Traffic Timeout will reset the unit if there has been no RF
activity in the configured time. 0 = Disabled (default)
Values (seconds)
600
300-65535
System Default Button
Enabled by default, when the CONFIG button on the front of the IPn3G is
held down for 10s while the unit is powered up, the unit will reset and all
settings will be reset to factory defaults. When disabled the unit will reset,
but the settings will not be overwritten.
Values (Selection)
Enable
Disable
NTP Time Synchronize
Note that if NTP Server Status is ENABLED, the ‘Synchronize with NTP
Server’ soft button on the System Configuration menu will be available for
use.
Leave as DISABLED (default) if a server is not available.
Disable
Enable
Values (Selection)
NTP Server (IP/Name)
IP address or domain name for NTP server (on local LAN or website
(provided that Internet access is available)) is to be entered in this field if
the NTP Server Status is configured as ENABLED.
valid NTP server IP
address or ‘name’
Values (0.0.0.0)
NTP may be used to
synchronize the time in
the
IPn3G
within
a
network to a reference
time source.
