© Microhard Systems Inc.
99
4.0 WebUI Configuration
Remote Port
Specify the port number running the GPS services at the IP Address
specified in the IP Address field.
Values (Port #)
0
Interval(s)
The repeat timer specifies the frequency at which the GPS data is reported
in seconds.
Values (seconds)
0
Trigger condition
The trigger condition defines the conditions that must be met before a GPS
update is reported. If OR is chosen, the Repeater Timer OR the Distance
trigger conditions must be met before an update is sent. The AND
condition, requires that both the Repeat timer AND the Distance trigger
conditions be met before an update is sent.
Values (selection)
OR
AND
Message#
The Message field allows customization of up to 4 different GPS messages
to be sent to the specified host.
None
-
Message is not used, no data will be sent
ALL
-
Sends all of the below
GGA
-
GPS Fix Data
GSA
-
Overall Satellite Data
GSV
-
Detailed Satellite Data
RMC
-
Recommended Min Data for GPS
VTG
-
Vector Track & Ground Speed
Values (selection)
None
ALL
GGA
GSA
GSV
RMC
VTG
Distance trigger (meters)
The distance trigger allows a specified distance to be traveled before the
GPS data is reported.
Values (meters)
0
Remote IP
Specify the IP Address of the destination of the GPS data UDP packets.
Values (IP Address)
0.0.0.0
GPS Reporting - UDP
