background image

28 

Replacing the fuse 

 
If the lamp burns out, the fine-wire fuse of the device might fuse, too.  
Only replace the fuse by a fuse of same type and rating. 

 
Before replacing the fuse, unplug power supply . 
 
Procedure: 
Step 1: 

Unscrew the fuse holder on the rear panel with a fitting screwdriver from  

             the housing (anti-clockwise). 

Step 2: 

Remove the old fuse from the fuse hol der. 

Step 3: 

Install the new fuse in the fuse holder. 

Step 4: 

Replace the fuse holder in the housing and fix it. 

 
Should you need any spare parts, please use genuine parts. 
If the power supply cable of this device becomes damaged, it has to be replaced  
by authorized dealers only in order to avoid hazards. 
Should you have further questions, please contact your dealer. 

 

 

We hope you will enjoy your 

MICROH ARENA ULTRA SPOT

. We can assure you that 

you will enjoy this device for years if you follow the instructions given in this manual. 
Should you have further questions, do not hesitate to contact your local dealer. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

All rights reserved (including those of translations in other languages). No part of this user 

manual may be reproduced or changed without written permission from the publisher. 

 

Please note: Every information is subject to change without prior notice.  

04/01 © Version 0.97

 

 

ENGLISH

 

 

MICROH 

ARENA ultra spot 

 
 
 
 
 
 
 

 

USERS MANUAL 

 

© Copyright 2001 

Keep this manual for future needs!  Reproduction prohibited!

 

Summary of Contents for ARENA ultra spot















Reviews: